en

CONSTRUCTION SYSTEMS

DECORATIVE FACADE COATINGS BASED MINERAL

ADMIXTURE SYSTEMS

"FLOMEL" S 100 concrete admixture for areas where transportation of liquid super plasticizers is a complicated issue

"FLOMEL" S 100 concrete admixture for areas where transportation of liquid super plasticizers is a complicated issue

Product consumption calculator


Preorder


Print


Product description

FLOMEL S 100 is a melamine sulfonate based powder composition, super plasticizing admixture, used for production of such powder products as cement and gypsum. The product conforms to the requirements of the AZS 221-2006 (TS EN 934-2) standard, Tables 3.1 and 3.2: “High water reduction, latest generation super plasticizing (improves concrete flow properties) concrete admixture”, and ASTM C 494 Type F standard: “High water reduction, latest generation super plasticizing concrete admixture”.

Fields of Application

This concrete admixture can be applied in the following areas:

  • production of chemical substances designated for construction industry;
  • production of cement based powder products;
  • production of gypsum based powder products;
  • areas where transportation of super plasticizers in liquid form is a complicated issue;
  • production of industrial molding plaster.

Advantages

  • increases strength of powder products reducing amount of mixed water;
  • increases application possibilities of powder products reducing amount of mixed water;
  • does not change the color of powder products;
  • produces liquid super plasticizer easily mixed with water at the construction site;
  • creates transparent mixture with water;

Technical specifications

Composition of product

melamine sulfonate based

Color:

white

Density

1.8-1.9 kg/liter

Package:

25 kg sacks made of craft paper strengthened with polyethylene

The parameters have been received at the +200C temperature and 50%  humidity.

Consumption

Amount of the FLOMEL S 100 product in per cents of the mixed product amount should be as follows:

  • to increase the application quality of the mixture – in the amount of 0.2 -0.4 %;
  • to increase strength of the mixture – in the amount of 0.3-0.6 %;
  • to increase hardness and resistance of the mixture – in the amount of 0.5-0.9 %;
  • for smooth surfaces and factory production of concrete – in the amount of 0.6-1.5 %
  • for plaster molding - 0.5-1.5 %;
  • actual amounts for usage are generally defined during laboratory tests.

Shelf Life and Storage Method

The product can be stored in original sacks in the areas with ambient temperature equal to or above +400C. Under the required storage conditions, the product can be stored in original packing during 24 months from the manufacturing date. The product in open containers should be used during one week provided the required storage conditions are maintained.

Warnings

  • when using the product observe regulations of operational and personnel safety, wear appropriate protective clothing, safety gloves, glasses, and respirators;
  • taking into consideration that the product can cause allergic reactions and itch, take care to avoid contact of its components with skin or eyes, otherwise immediately rinse them with large amount of water and wash with soap;
  • in case you swallow the product, immediately consult a physician;
  • do not keep food in the areas of the product application;
  • keep the product away from children;

Warranty and technical support

  • information indicated in technical specifications is based on scientific and experimental data;
  • Matanat А company is responsible for the product quality only;
  • with the exception of cases of works executed under the supervision of the company specialists, Мatanat А company shall not be liable for any problems occuring due to improper use of the product by other persons;
  • the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
  • for technical support and/or more information please do not hesitate to contact the Matanat А company!