en

CONSTRUCTION SYSTEMS

DECORATIVE FACADE COATINGS BASED MINERAL

ADMIXTURE SYSTEMS

"İzoLex" monocomponent waterproofing material

"İzoLex" monocomponent waterproofing material

Product consumption calculator


Preorder


Print


Product description

Cement based, monocomponent, resistant to chemicals, waterproofing mixture, provides waterproofing to materials. The product conforms to the requirements of the TS AZS 31 43498-05-2005 specifications. For technical water reservoirs.

Fields of Application

This insulating mixture can be applied in the following areas:

  • bath area and washrooms in buildings;
  • terraces and balconies;
  • water reservoirs;
  • on concrete, plaster and flooring plaster surfaces.

 Advantages

  • Easy preparation and use;
  • Resistance to chemical substances and salts contained in the soil;
  • Due to high adhesive ability and elasticity the product forms strong waterproofing insulation layer which is ideal before application of plaster, flooring plaster, ceramic tiles and other facing plates.
  • Applied onto surface using brush and/or trowel.

Application procedures

Preparation of the surfaces. Clean the surface from any residues deteriorating adhesive force. Pay attention to ensuring rigidity of the surface. In case the surface to be used has any defects, they should be removed with MATON 100 repair mixture. Before application of the product the surface should be soaked with water, and primed with BINMADER primer to provide better results.

Preparation of the mixture. Carefully pour 25 kg powder mix into 9.5-10.0 liters of water (when using paddle roller) and mix till it is entirely homogeneous (to prepare the mixture it is recommended to use slow circulation mixer). Wait 3-5 minutes to allow complete mixing of substances composing the mixture, then mix again before application.

Application. Spread the prepared mixture over the surface using paddle roller or trowel and forming a layer of equal thickness. The oval shape should be given to the corners in the product application area, and the mixture should be reinforced with mesh. In case of application of 2 layers using paddle roller, the time between application of the layers may be 5-6 hours, depending on the ambient temperature. Application of 2-3 mm thick layer is enough. This thickness can be achieved by application of one layer using a trowel. The treated surface should be protected from direct sun rays, precipitations and dust within 48 hours. As the product is applied in thin layers, after its application onto the surfaces to be subject to pedestrian flows and vehicles traffic it should be treated with protective facing materials, such as concrete flooring plaster or ceramic tiles.

Recommendations. The prepared mixture should be used within 1 hour. Do not use the mixture after expiration of this period. The surfaces should be put into operation or covered with facing plates in at least 1 week after application of the mixture.

Consumption

The IzоLех waterproofing mixture is applied in foundations, roofs, terraces in 2 mm thick layers, and in water reservoirs in 3 mm thick layer.

First layer consumption:   1.0  kg/m2  of powder product

Second layer consumption:   1.0  kg/m2 of powder product

Shelf Life and Storage Method

The product can be stored during 12 months packed in original sacks in dry conditions on wooden racks, maximum 10 sacks per rack.

Warnings

  • taking into consideration that IzoLex is a cement based product of complex composition, immediately rinse it with water in case of contact with skin or eyes;
  • do not add any substances not indicated in the application instructions;
  • parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

Warranty and technical support

  • information indicated in technical specifications is based on scientific and experimental data;
  • Matanat А company is responsible for the product quality only;
  • with the exception of cases of works executed under the supervision of the company specialists, Мatanat  А company shall not be liable for any problems occuring due to improper use of the product by other persons;
  • the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
  • for technical support and/or more information please do not hesitate to contact the Matanat А company!